Dust Explosions – How to Demonstrate DSEAR/ATEX Compliance
21 April 2015
£445 per delegate
Explosions and fires within the processing industry from combustible materials are a known hazard and can give rise to serious injury - perhaps even fatality - such as in the Imperial Sugar refinery explosion in February 2008, where 14 people died, 36 were injured and the packing plant was largely destroyed.
Legislation introduced in 2002 - the Dangerous Substances and Explosive Atmospheres Regulations 2002 (DSEAR) - rationalised workplace assessment for fire and hazard identification, and methods of prevention or mitigation. DSEAR requires all workplaces where substances that could give rise to fire or explosion are handled or stored must be fully assessed and protected.
This course gives an introduction to the subject, the responsibilities and the simple measures that can be taken to reduce the hazard of a dust explosion. It includes a brief overview of current legislation and the safety precautions required to demonstrate compliance and provide a safe working environment for employees.
- UK dust explosion statistics
- What is an explosion?
- Standard explosion tests
- Generic vs. actual test data
- Hazardous area zoning – 20, 21 and 22
- Fundamentals of DSEAR risk assessment
- Explosion prevention methods
- Explosion protection methods
A one day course designed to allow the subjects to be discussed in depth amongst the group.
Is this for me?
Plant operators and designers, plant managers, safety officers and maintenance personnel will all benefit enormously from attending this course, through improving their understanding of dust explosions and the requirements of current legislation.
The course will be of great interest to personnel that are new to materials handling, or require an update on the subject.
The course will be held at the University of Greenwich, Medway Campus, Short Course Centre, Chatham Maritime, Kent.
Mr Mike Ward, MA, UK Sales Manager, Explosion Hazard Testing Ltd
Note: the Wolfson Centre reserves the right to substitute leaders of equal quality should this be dictated by circumstances beyond their control.
Registration and fees
Intending participants should complete the online booking form. The fee will be payable upon your return of the registration form and covers lectures, course notes, lunch and refreshments. All applicants will be acknowledged and confirmed. A discount of 5% is available for 3 or more delegates from one company attending the same course at the same time.
Note: in order to enable sufficient time to be devoted to discussing delegates' problems, the numbers for this course will be limited. Early registration is therefore recommended.
This course can be delivered as an In-Company course. These are proving to be a popular option for companies who have a number of personnel who would benefit from education in the subject area, for 3 main reasons:
- COST: It is more economic for us to bring the course to you, than for you to send several staff out to us;
- RELEVANCE: We can tailor the course programme to suit the operations you have in your plant, hence reducing the amount of material which is not directly relevant;
- CONVENIENCE: We can run the course when iot suits you, even over several separate days rather than in a block if it is better for you.
If you are interested in discussing your requirements, please contact us.